Kalpataru Piping Solutions
Bhuleshwar, Mumbai, Maharashtra
GST No. 27APFPJ2294D1Z0
TrustSEAL Verified
SEND SMS
SEND EMAIL
Product Details:
| Fastener Type | Threaded Bar |
| Material | Stainless Steel |
| Grade | Stainless Steel 904L |
| Usage/Application | Industrial |
| Standard | ASTM A193 |
| Finish | Polished |
Product Details:
| Steel Grade | SS904L |
| Thickness/Diameter | 5 To 50 Mm |
| Single Piece Length | 3 meter,6 meter |
| Type | Steel Plate |
| Grade | 904L |
| Standard | ASTM |
manufacturer of stainless steel 904l plates & sheets . Astm a240 stainless steel 904l sheets & plates . Astm a480 stainless steel 904l sheets & plates . Stainless steel 904l strips . Stainless steel 904l coils manufacturer
uns n08904 stainless steel 904l sheet and plate . Din 1. 4539 stainless steel 904l sheet and plate . Stainless steel 904l uns n08904 strips . Stainless steel 904l uns n08904 coils
combination 904l is a hardenable, martensitic stainless steel that is an alteration of alloy 410. Like 410, it contains at least 12% chromium, sufficiently adequate to give consumption safe properties. Compound 904l has higher carbon content than alloy 410 which is intended to advance quality and hardness attributes. It has great flexibility it the tempered condition yet is fit for being solidified up to rockwell hardness 50 hrc, the most astounding hardness of the 12% chromium grades. Because of its solidifying properties, alloy 904l is not frequently welded, in spite of the fact that it is conceivable.
we exports stainless steel 904l plates, stainless steel 904l sheets, stainless steel 904l shim sheets, stainless steel 904l perforated sheet, stainless steel 904l chequered plate, stainless steel 904l rolls, stainless steel 904l ring, stainless steel 904l circles, stainless steel 904l coils, stainless steel 904l strips, stainless steel 904l flat, stainless steel 904l blank , stainless steel 904l profile, stainless steel 904l foils .
martensitic stainless steels are intended for high hardness and here and there different properties are to some degree bargained. Erosion resistance is lower than the normal austenitic evaluations and their valuable working extent is restricted by their loss of flexibility at below zero temperatures and loss of quality by over-treating at hoisted temperatures. Its best consumption resistance is accomplished when the metal is solidified and surface ground or cleaned.
chemical composition
| grade | chemical composition - per cent | nearest equivalent specification | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| aisi | c max | mn max | p max | s max | si max | cr | ni | mo | other element | i. S. | en'' |
| 904l | 0. 02 | 2. 0 | 0. 045 | 0. 035 | 1 | 19. 0/23. 0 | 23 0/28 0 | 4 0-5 0 | cu:1-2 | - | - |
Details ->
| steel grades | aisi904l (1 4539) (uns no 8904) |
|---|---|
| production | hot-rolled (hr) / cold-rolled (cr) |
| standard | astm b625 / sb625 |
| thickness | 1 0mm – 100mm |
| width | 1000mm-2000mm |
| application | wiring in electrostatic precipitators , oil refinery components , seawater cooling devices , gas scrubbing plant , pulp and paper processing industries , acetic, phosphoric and sulphuric acid processing plants |
Product Details:
| Usage/Application | Structure Pipe |
| Grades | Super Duplex Steel S32750 , S32760 |
| Process | Free forging, Plate cutting , Forged |
| Connect Type | Welded, threaded, BW, SW |
| Size | 1/8"-4" (DN6-DN100) |
| Dimensions | ASME / ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799 etc |
Kalpataru Piping Solution offers an excellent collection of Stainless Steel 904L Outlet Fittings, which has a number of outstanding features to offer such as easy fitments, rust free, perfect finish, etc. Stainless Steel 904L Sockolet Fittings is soaring alloyed austenitic steel by means of exceptionally good corrosion resistance. Stainless Steel 904L Sweepolet Fittings is added by means of copper for also to increase its resistance to robust reducing acids, like sulphuric acid.
Standard Specification For Stainless Steel 904L
Specifications : ASTM A182 & ASME SA182
Dimensions : ASTM A182, ASME SA182, ASTM A403
Size : 1/2' to 24'
Thickness : SCH 5S,SCH 10S, SCH 40S, SCH 80S, SCH 120S
Class : 3000LBS, 6000LBS, 9000LBS
Type : Socket Weld (S/W) & Screwed (SCRD), Threadolet, Latrolet, Weldolet, Sockolet, Nippolet, Flexolet Threaded and Sweepolet, Flexolet butt-weld.
Stainless Steel 904L Olets Manufacturing Standards :| ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASME B16.11 | Forged Fittings Socket – Welding and Threaded |
| MSS SP-97 | Integrally Reinforced Forged Branch Outlet Fittings – Socket Welding, Threaded and Buttwelding Ends |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
| OUR SUMMARY: | |
| Reviewer | AASHISH METAL & ALLOYS |
| Review Date | 22/8/2017 |
| Reviewed Product | Stainless Steel 904L Olets |
| Author Rating | |
Product Details:
| Material | Stainless Steel |
| Connection | Male, Welded, Female |
| Brand | KPS |
| Technique | Forged |
| Grade | 904L |
| Finish | Polished |
Stainless Steel 904L Forged Reducer, SS DIN 1.4539 Forged Threaded Fittings, Steel 904L Forged Socket weld Fittings, ASME/ANSI B16.11 Forged Fittings Exporter.
ASTM A182 SS 904L Forged Elbow, Steel UNS N08904 Threaded Cap Manufacturer, Stainless Steel 904L Socket weld Coupling Suppliers In India.
Kalpataru Piping Solution offers an exceptional array of Stainless Steel 904L Forged Fittings, which has some excellent features to offer such as rust free, easy fitments, perfect finish, and more. The addition of copper to these Stainless Steel 904L Bush Fittings (UNS N08904) gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. Stainless Steel 904L Plug Fittings’ low carbon content improves cleanliness and weld strength.
Stainless Steel 904L Cap Fittings is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. Stainless Steel 904L Coupling Fittings is a high alloyed austenitic stainless steel with very good corrosion resistance. Meanwhile, these Grade 904L Forged Fittings are also being offered in different sizes and shapes to our customers.
Stainless Steel 904L Forged Fittings Specifications :
Dimensions : ASTM A182 / ASTM SB 459
Specifications : ASTM, ASME, ANSI 16.11, MSS SP-79,83,95,97,BS 3799Size : 1/8″~4″ (DN6~DN100)
Pressure Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socketweld Fittings, Screwed-Threaded Fittings
Class : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.
Grade : Stainless Steel 904L – UNS N08904
Chemical Composition
| Grade | Ni | C | Mn | Si | Cr | Cu | Mo | P | N | S |
| Stainless Steel 904L | 28 - 23 | 0.02 max | 2.00 max | 1.00 max | 23 - 19 | 2 - 1 | 5 - 4 | 0.045 max | 25 - 10 | 0.035 max |
Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8 | 1300 - 1390 ¿¿¿ | 490 | 220 | 35% min |
Product Details:
| Density | 8 |
| Elongation | 35% min |
| Material | Stainless Steel |
| Melting Point | 1300 - 1390 C |
| Tensile Strength | 490 |
| Yield Strength | 220 |
Stainless Steel 904L Seamless Butt weld Fittings, Steel DIN 1.4539 Pipe Fittings, ASME/ANSI B16.9 Welded Pipe Fittings, SS 904L Reducer Exporter.ASTM B366 Stainless Steel 904L Buttweld Elbow, Steel UNS N08904 End Pipe Cap Manufacturer, SS 904L Long Radius Bend Suppliers In India.
Kalpataru Piping Solution is amongst the most prominent names in the industry, offering an exceptional array of Stainless Steel 904L Butt Weld Pipe Fittings that are performance based and are highly efficient in nature. Stainless Steel 904L Butt Weld Fittings (UNS N08904) has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid.
Stainless Steel 904L Pipe Fittings is a low carbon high Steel austenitic stainless steel which is widely used in applications where the corrosion properties of Stainless Steel 316L and Stainless Steel 317L are not adequate. Stainless Steel 904L Elbow Pipe Fittings is an austenitic stainless steel designed for moderate to high corrosion resistance. Meanwhile, these Grade 904L Butt Weld Pipe Fittings are also being offered in different sizes and shapes to our customers.
Stainless Steel 904L Pipe Fittings Specifications :| Specifications : ASTM B 366 / ASME SB 366 | ||||||||||||||||||||||||||||||||
| Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 | ||||||||||||||||||||||||||||||||
| Size: 1/8” NB TO 48” NB in Sch 10s, 40s, 80s, 160s, XXS. | ||||||||||||||||||||||||||||||||
| Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom | ||||||||||||||||||||||||||||||||
| Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 | ||||||||||||||||||||||||||||||||
| Type : Seamless / Welded / Fabricated | ||||||||||||||||||||||||||||||||
| Grade : SS 904L UNS N08904 Chemical Composition
Mechanical Properties
|
Product Details:
| Type | Seamless / Welded / Fabricated |
| Material | SS |
| Connection | Female, Male, Welded |
| Grade | SS 904L UNS N08904 |
| Tensile Strength | 490 |
| Dimensions | ANSI/ASME B16.9, B16.28, MSS-SP-43 |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or |
| Melting Point | 1300 - 1390 C |
ASTM B182 Stainless Steel 904L Bulkhead Union, SS UNS N08904 Compression Tube Fittings Manufacturer, Steel 904L Male Elbow Suppliers In India.
Stainless Steel 904L Male Branch Tee, SS DIN No. 1.4539 Bulkhead Lock Nut, Steel 904L Straight Union, Stainless Steel 904L Reducing Union Exporter.
Kalpataru Piping Solution offers an exceptional array of Stainless Steel 904L Compression Tube Fittings, where our entire product range is corrosion resistant in nature. Stainless Steel 904L Tube Fittings (UNS N08904) is a non-stabilized austenitic stainless steel with low carbon content. Stainless Steel 904L Compression Fittings is very useful for details in marine environment, chemical and pharmaceutical industry. Stainless Steel 904L Ferrule Fittings is intended for use under severe corrosive conditions. Stainless Steel 904L Double Ferrule Fittings is used extensively in the chemical process industry including the production of phosphate-based fertilizers.
Stainless Steel 904L Male Connector Fittings is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Meanwhile, these Grade 904L Compression Tube Fittings are also being offered in different sizes and shapes to our customers.
Stainless Steel 904L Compression Tube Fittings Specifications :
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or
Custom Specification : ASTM A182 / A403 & ASME SA182 / SA403
Type : Seamless / Welded / FabricatedRange: ½ ”NB to 48”NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.Grade : SS 904L UNS N08904
Chemical Composition
| Grade | Ni | C | Mn | Si | Cr | Cu | Mo | P | N | S |
| Stainless Steel 904L | 28 - 23 | 0.02 max | 2.00 max | 1.00 max | 23 - 19 | 2 - 1 | 5 - 4 | 0.045 max | 25 - 10 | 0.035 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8 | 1300 - 1390 ¿¿¿ | 490 | 220 | 35% min |
Kalpataru Piping Solution exports Stainless Steel 904L Compression Fittings to countries like UAE, Bahrain, Italy, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria, Kuwait, Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan & Saudi Arabia.
Product Details:
| Usage/Application | Construction |
| Standard | 904L / 1.4539 |
| Range | 3 MM - 350 MM |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Application | Oil refinery components, Seawater cooling devices |
Kalpataru Piping Solution are occupied with offering extensive variety of Stainless Steel 904 L Round Bars that is generally requested in a few commercial enterprises. These Stainless Steel 904 L Round Bars are made utilizing high review of crude material that is sourced from our dependable sellers. These are having fabulous erosion resistance and are anything but difficult to work. These are accessible in different sizes and measurements according to the modern particulars and quality guidelines.
Specification
| Standard | 904L / 1.4539 |
|---|---|
| Designation | ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479 |
| Range | 3 MM TO 350 MM DIA |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Application | Wiring in electrostatic precipitators, Oil refinery components, Seawater cooling devices, Gas scrubbing plants, Pulp and paper processing industries, Acetic, phosphoric and sulphuric acid processing plants. |
Chemical Composition
| C | Cr | Cu | Mn | Mo | Ni | P | S |
|---|---|---|---|---|---|---|---|
| Max | Max | Max | Max | ||||
| 0.02 | 19.0-23.0 | 2.0 | 4.0-5.0 | 23.0-28.0 | 0.045 | 0.035 | 1.0 |
Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) | Brinell (HB) | ||||
| 904L | 490 | 220 | 36 | 70-90 typical | 150 |
Product Details:
| Grade | 904L |
| Tensile Strength | 490 MPA |
| Yield Strength | 220 MPa |
| Elongation | 35 mm |
| Hardness | 70-90 typical |
| Dimension | BS4504,EN-1092 |
Stainess Steel 904L SORF Flanges, SS DIN 1.4539 Blind Flanges, Steel 904L Orifice Flanges, Stainess Steel 904L Long Weld Neck Flanges Exporter.
Kalpataru Piping Solutionare well known exporter and supplier of Stainless Steel 904L Flanges in Mumbai, India. SS 904L Flange Suppliers | SS 904L Flange Stockiest | SS 904L Flange Exporters
We are occupied with Exporting, Supplying and Stocking SS 904L Weld Neck Flanges. These SS 904L Weld Neck Flanges are uniquely composed in a manner that the distance across of the channel consummately fits the width of the ribs. As a result of its solid association and impervious to consumption, these welding neck spines can withstand great conditions, for example, high fluctuation of temperatures.
Stainless Steel 904L Flanges werkstoff nr. / DIN 1.4939 UNS S90400 Flanges, SS 904L Flanges Manufacturer, SS 904L Flanges Suppliers.
| Standard | SS 904 |
|---|---|
| UNS | S90400 |
| WERKSTOFF NR. | 1.4939 |
| Standard | 904L /1.4939 |
|---|---|
| Specification | ANSI B16.5 |
| Designation | A240 / A182, SA 240 / SA 182 |
| Class | 150#, 300#, 400 #, 600#, 900#, 1500# & 2500# |
| Dimension | BS4504, EN-1092 |
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | |
|---|---|---|---|---|---|---|---|---|---|---|
| 904L | Min | - | - | - | - | - | 19.0 | 4.00 | 23.00 | 1.00 |
| max. | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 2.00 |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 904L | 490 | 220 | 35 | 70-90 typical | - |
| Rockwell Hardness value range is typical only; other values are specified limits. |
